{"title":"VR6 2.8L, 3.2L, 3.6L","description":null,"products":[{"product_id":"vr6-mount-kit-vw-mk2-mk3-corrado","title":"VR6\/02J Mount Kit - VW MK2 | MK3 | Corrado","description":"\u003cp\u003eThe Fabless VR6\/02J Mount Kit [OEM Position] is a direct replacement for the factory MK3 VR6 \u0026amp; Corrado VR6 Engine\/Transmission mounts. Made from mild steel, beautifully TIG Welded and coated with black powder coat for durability.\u003c\/p\u003e\n\u003cp\u003eOur mounts are stronger and stiffer than the factory mounts while also providing some adjustability on the Block Mount. The block mount has two positions; factory height \u0026amp; up to a 16mm drop (16mm lower setting with MK3\/Corrado VR6 Subframe, 8mm drop with MK2\/Corrado G60 subframe selection). The lower setting on the mount is useful for additional hood clearance but it also helps to level out the engine appearance.\u003c\/p\u003e\n\u003cp\u003eThese mounts are OEM position, which means they work with factory axles. These mounts will not give you any additional frame rail clearance and will have the typical factory VR6 lean on the top block mount setting and less lean on the lower setting. For additional frame rail clearance and a level engine, check out our VR6 Engine Swap Kits.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/5QOTuA_q6A4\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVR6 Block Mount with polyurethane bushing\u003c\/li\u003e\n\u003cli\u003e02A\/02J Transmission Mount with polyurethane bushing\u003c\/li\u003e\n\u003cli\u003eZinc plated mounting hardware\u003c\/li\u003e\n\u003cli\u003eBlack powder coat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eAdd-Ons\/Compatible Products\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eTubular Front Cross Bar - VW MK2\/Corrado \u003c\/li\u003e\n\u003cli\u003eTubular Front Cross Bar - VW MK3\u003c\/li\u003e\n\u003cli\u003eAdjustable Upper Rad Mounts (VR6 Radiator) \u003cem\u003e*MK2 application only\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003ePolyurethane Jack Pad\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003ch4\u003eVehicles\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eVW MK2 Golf\/Jetta\u003c\/li\u003e\n\u003cli\u003eVW MK3 Golf\/Jetta\u003c\/li\u003e\n\u003cli\u003eCorrado VR6\/Corrado G60\u003c\/li\u003e\n\u003cli\u003ePassat*\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e*For Passat please contact for fitment.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch4\u003eEngines\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2.8L 12v VR6\u003c\/li\u003e\n\u003cli\u003e2.8L 24v VR6\u003c\/li\u003e\n\u003cli\u003e3.2L VR6\u003c\/li\u003e\n\u003cli\u003e3.6L VR6\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFront Cross Members\u003c\/h4\u003e\n\u003cp\u003eMK2\/Corrado G60\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFabless Tubular Front Cross Bar - VW MK2\/Corrado\u003c\/li\u003e\n\u003cli\u003eModified factory front cross member\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMK3\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFabless Tubular Front Cross Bar - VW MK3\u003c\/li\u003e\n\u003cli\u003eFactory cross member\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCorrado VR6\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFabless Tubular Front Cross Bar - VW MK2\/Corrado\u003c\/li\u003e\n\u003cli\u003eFactory cross member\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTransmissions\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e02A 5-Speed\u003c\/li\u003e\n\u003cli\u003e02J 5-Speed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eAxles\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFactory 100mm Axles\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fabless Manufacturing","offers":[{"title":"VW MK2\/Corrado G60 Subframe","offer_id":29374224826437,"sku":"29-3200","price":510.0,"currency_code":"USD","in_stock":true},{"title":"VW MK3\/Corrado VR6 Subframe","offer_id":29375620481093,"sku":"29-3201","price":510.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0074\/0727\/2005\/products\/IMG_4941_copy_53e92d2e-48ff-493e-bb9e-8e9a790e9302.jpg?v=1620840415"},{"product_id":"vr6-02m-mount-kit-oem-position-vw-mk2-mk3-corrado","title":"VR6\/02M Mount Kit - VW MK2 | MK3 | Corrado","description":"\u003cp data-mce-fragment=\"1\"\u003eThe Fabless VR6\/02M Mount Kit provides a solution to install any VR6 Engine with an 02M Transmission in a MK2, Corrado or MK3.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAvailable in both subframe mounting options; MK2\/Corrado G60 subframe or MK3\/Corrado VR6 subframe. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur mounts are stronger and stiffer than the factory mounts while also providing some adjustability on the Block Mount. The block mount has two positions; factory height \u0026amp; up to a 16mm drop (16mm lower setting with MK3\/Corrado VR6 Subframe, 8mm drop with MK2\/Corrado G60 subframe selection). The lower setting on the mount is useful for additional hood clearance but it also helps to level out the engine appearance without impacting the axle fitment. \u003cspan data-mce-fragment=\"1\"\u003eThese mounts will have the typical factory VR6 lean on the top block mount setting and less lean on the lower setting. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThese mounts keep the engine in OEM position, which means 02M axles on the market are compatible. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003e\u003cem\u003eNOTE: The subframe cup has to be moved back to clear the inner CV on the 02M transmission.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVR6 Block Mount with subframe Perch\u003c\/li\u003e\n\u003cli\u003e02M Transmission Mount with subframe Perch\u003c\/li\u003e\n\u003cli\u003eZinc plated mounting hardware\u003c\/li\u003e\n\u003cli\u003ePolyurethane bushings\u003c\/li\u003e\n\u003cli\u003eBlack powder coat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eAdd-Ons\/Compatible Products\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eTubular Front Cross Bar - VW MK2\u003c\/li\u003e\n\u003cli\u003eTubular Front Cross Bar - VW Corrado\u003c\/li\u003e\n\u003cli\u003eTubular Front Cross Bar - VW MK3\u003c\/li\u003e\n\u003cli\u003eAdjustable Upper Rad Mounts (VR6 Radiator)\u003cspan\u003e \u003c\/span\u003e\u003cem\u003e*MK2 application only\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003ePolyurethane Jack Pad\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003ch4\u003eVehicles\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eVW MK2 Golf\/Jetta\u003c\/li\u003e\n\u003cli\u003eVW MK3 Golf\/Jetta\u003c\/li\u003e\n\u003cli\u003eCorrado VR6\/Corrado G60\u003c\/li\u003e\n\u003cli\u003ePassat*\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e*For Passat please contact for fitment.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch4\u003eEngines\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2.8L 12v VR6\u003c\/li\u003e\n\u003cli\u003e2.8L 24v VR6\u003c\/li\u003e\n\u003cli\u003e3.2L VR6\u003c\/li\u003e\n\u003cli\u003e3.6L VR6\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFront Cross Members\u003c\/h4\u003e\n\u003cp\u003e\u003cem\u003eMK2\/Corrado G60\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFabless Tubular Front Cross Bar - VW MK2\/Corrado with VR6\/02M Front Engine Mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eMK3\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFabless Tubular Front Cross Bar - VW MK3 \u003cspan data-mce-fragment=\"1\"\u003ewith VR6\/02M Front Engine Mount\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eCorrado VR6\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFabless Tubular Front Cross Bar - VW MK2\/Corrado \u003cspan data-mce-fragment=\"1\"\u003ewith VR6\/02M Front Engine Mount\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTransmissions\u003c\/h4\u003e\n\u003cp\u003e02M - MK4 6-Speed Manual Transmissions\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e02M 6-Speed Manual FWD\/AWD - VW MK4\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e02M 6-Speed Manual FWD\/AWD - Audi MK1 TT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e02M+ - MK5-MK7 6 Speed Manual Transmissions\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e02Q\u003cspan\u003e \u003c\/span\u003e6-Speed Manual FWD\/AWD - VW MK5\/MK6\/MK7\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn AWD\/quattro applications a Corrado G60\/MK2 Subframe is needed for clearance. Otherwise modification is required for the axle to clear the engine perch on the subframe.\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eAxles\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e02M\/02Q Compatible Axles (not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAlthough our mounts are OEM position, custom axles are required to accommodate the transmission. The 02M\/02Q is larger and uses larger inner CV's compared to the factory 02A\/02J Transmission in the MK2, MK3 \u0026amp; Corrado. Any axles on the market intended for an 02M\/02Q in a MK2, MK3 or Corrado application will work with our mount positioning.\u003c\/span\u003e\u003c\/p\u003e","brand":"Fabless Manufacturing","offers":[{"title":"VW MK2\/Corrado G60 Subframe \/ Trans 02M - MK4 6-Speed Manual","offer_id":32676356653153,"sku":"29-3202","price":610.0,"currency_code":"USD","in_stock":true},{"title":"VW MK2\/Corrado G60 Subframe \/ Trans 02M+ - MK5\/6\/7 6-Speed Manual","offer_id":39893042790497,"sku":"29-3204","price":610.0,"currency_code":"USD","in_stock":true},{"title":"VW MK3\/Corrado VR6 Subframe \/ Trans 02M - MK4 6-Speed Manual","offer_id":32676356685921,"sku":"29-3203","price":610.0,"currency_code":"USD","in_stock":true},{"title":"VW MK3\/Corrado VR6 Subframe \/ Trans 02M+ - MK5\/6\/7 6-Speed Manual","offer_id":39893042823265,"sku":"29-3205","price":610.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0074\/0727\/2005\/products\/02_43662a39-8028-4d91-b202-4cd114b96469.jpg?v=1647635812"},{"product_id":"vr6-02m-complete-mount-kit-vw-mk2-corrado","title":"VR6\/02M Complete Mount Kit - VW MK2","description":"\u003cp data-mce-fragment=\"1\"\u003eThe Fabless VR6\/02M Complete Mount Kit provides a solution to install any VR6 Engine with an 02M Transmission in a MK2. This kit is a full mount solution, providing an upgraded front cross member and all the mounts needed for the swap.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAvailable in both subframe mounting options; MK2\/Corrado G60 subframe or MK3\/Corrado VR6 subframe.  \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur mounts are stronger and stiffer than the factory mounts while also providing some adjustability on the Block Mount. The block mount has two positions; factory height \u0026amp; up to a 16mm drop (16mm lower setting with MK3\/Corrado VR6 Subframe, 8mm drop with MK2\/Corrado G60 subframe selection). The lower setting on the mount is useful for additional hood clearance but it also helps to level out the engine appearance without impacting the axle fitment. \u003cspan data-mce-fragment=\"1\"\u003eThese mounts will have the typical factory VR6 lean on the top block mount setting and less lean on the lower setting. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThese mounts keep the engine in OEM position, which means 02M axles on the market are compatible.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eNOTE: The subframe cup has to be moved back to clear the inner CV on the 02M transmission.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eVR6 Block Mount with subframe Perch\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e02M Transmission Mount with subframe Perch\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMK2 Tubular Front Cross Bar with Front Engine Mount\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eZinc plated mounting hardware\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePolyurethane bushings\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBlack powder coat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eAdd-Ons\/Compatible Products\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAdjustable Upper Rad Mounts (VR6 Radiator)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePolyurethane Jack Pad\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eCompatibility\u003c\/h3\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eVehicles\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eVW MK2 Golf\/Jetta\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePassat*\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003e*For Passat please contact for fitment.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eEngines\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2.8L 12v VR6\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2.8L 24v VR6\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e3.2L VR6\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e3.6L VR6\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eTransmissions\u003c\/h4\u003e\n\u003cp\u003e02M\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e02M 6-Speed Manual FWD\/AWD - VW MK4\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e02M 6-Speed Manual FWD\/AWD - Audi MK1 TT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e02M+\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e02Q\u003cspan\u003e \u003c\/span\u003e6-Speed Manual FWD\/AWD - VW MK5\/MK6\/MK7\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn AWD\/quattro applications a Corrado G60\/MK2 Subframe is needed for clearance. Otherwise modification is required for the axle to clear the engine perch on the subframe.\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eAxles\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e02M\/02Q Compatible Axles (not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAlthough our mounts are OEM position, custom axles are required to accommodate the transmission. The 02M\/02Q is larger and uses larger inner CV's compared to the factory 02A Transmission in the MK2. Any axles on the market intended for an 02M\/02Q in a MK2, MK3 or Corrado application will work with our mount positioning.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\u003c\/ul\u003e\n\u003ch4\u003eRadiators\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e8v\/16v Radiator\u003c\/li\u003e\n\u003cli\u003eMK3 VR6 Radiator (North American)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eRemovable lower rad pins are provided for fitment of both rad types listed. For the MK2 rad support, we offer bolt in upper radiator mounts for both options. \u003c\/em\u003e\u003c\/p\u003e\n\u003ch4\u003eFans\u003c\/h4\u003e\n\u003cp\u003eA factory fan set up will work, however if space or engine cooling is a concern, a slim fan set up with Spal fans is recommended. Check out our Engine Cooling dropdown under Swap Parts.\u003c\/p\u003e","brand":"Fabless Manufacturing","offers":[{"title":"VW MK2\/Corrado G60 Subframe \/ 2.8L 12v VR6 \/ 02M - MK4 6-Speed Manual","offer_id":32690254676065,"sku":"29-3212","price":1035.0,"currency_code":"USD","in_stock":true},{"title":"VW MK2\/Corrado G60 Subframe \/ 2.8L 12v VR6 \/ 02M+ - MK5\/6\/7 6-Speed Manual","offer_id":39892996587617,"sku":"29-3245","price":1035.0,"currency_code":"USD","in_stock":true},{"title":"VW MK2\/Corrado G60 Subframe \/ 2.8L 24v 3.2L \u0026 3.6L \/ 02M - MK4 6-Speed Manual","offer_id":32690254708833,"sku":"29-3216","price":1070.0,"currency_code":"USD","in_stock":true},{"title":"VW MK2\/Corrado G60 Subframe \/ 2.8L 24v 3.2L \u0026 3.6L \/ 02M+ - MK5\/6\/7 6-Speed Manual","offer_id":39892996620385,"sku":"29-3247","price":1070.0,"currency_code":"USD","in_stock":true},{"title":"VW MK3\/Corrado VR6 Subframe \/ 2.8L 12v VR6 \/ 02M - MK4 6-Speed Manual","offer_id":32690254741601,"sku":"29-3213","price":1035.0,"currency_code":"USD","in_stock":true},{"title":"VW MK3\/Corrado VR6 Subframe \/ 2.8L 12v VR6 \/ 02M+ - MK5\/6\/7 6-Speed Manual","offer_id":39892996653153,"sku":"29-3246","price":1035.0,"currency_code":"USD","in_stock":true},{"title":"VW MK3\/Corrado VR6 Subframe \/ 2.8L 24v 3.2L \u0026 3.6L \/ 02M - MK4 6-Speed Manual","offer_id":32690254774369,"sku":"29-3217","price":1070.0,"currency_code":"USD","in_stock":true},{"title":"VW MK3\/Corrado VR6 Subframe \/ 2.8L 24v 3.2L \u0026 3.6L \/ 02M+ - MK5\/6\/7 6-Speed Manual","offer_id":39892996685921,"sku":"29-3248","price":1070.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0074\/0727\/2005\/products\/03_1afad447-6ebf-4f91-98ba-11c9a5dfc29c.jpg?v=1647880844"},{"product_id":"vr6-02m-complete-mount-kit-vw-mk3","title":"VR6\/02M Complete Mount Kit - VW MK3","description":"\u003cp data-mce-fragment=\"1\"\u003eThe Fabless VR6\/02M Complete Mount Kit provides a solution to install any VR6 Engine with an 02M Transmission in a MK3. This kit is a full mount solution, providing an upgraded front cross member and all the mounts needed for the swap. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eOur mounts are stronger and stiffer than the factory mounts while also providing some adjustability on the Block Mount. The block mount has two positions; factory height (top position) \u0026amp; a 16mm drop with MK3\/Corrado VR6 Subframe (lower setting). \u003c\/span\u003eThe lower setting on the mount is useful for additional hood clearance but it also helps to level out the engine appearance without impacting the axle fitment. These mounts will have the typical factory VR6 lean on the top block mount setting and less lean on the lower setting. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThese mounts keep the engine in OEM position, which means 02M axles on the market are compatible. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eNOTE: The subframe cup has to be moved back to clear the inner CV on the 02M transmission.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eVR6 Block Mount with subframe Perch\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e02M Transmission Mount with subframe Perch\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMK3 Tubular Front Cross Bar with Front Engine Mount\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eZinc plated mounting hardware\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePolyurethane bushings\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBlack powder coat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eAdd-Ons\/Compatible Products\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan\u003eRadiator Mount Kit - VW MK3 (radiator bushings)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePolyurethane Jack Pad\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eCompatibility\u003c\/h3\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eVehicles\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eVW MK3 Golf\/Jetta\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eEngines\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2.8L 12v VR6\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2.8L 24v VR6\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e3.2L VR6\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e3.6L VR6\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eTransmissions\u003c\/h4\u003e\n\u003cp\u003e02M \u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e02M 6-Speed Manual FWD\/AWD - VW MK4\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e02M 6-Speed Manual FWD\/AWD - Audi MK1 TT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e02M+\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e02Q\u003cspan\u003e \u003c\/span\u003e6-Speed Manual FWD\/AWD - VW MK5\/MK6\/MK7\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn AWD\/quattro applications a Corrado G60\/MK2 Subframe is needed for clearance. Otherwise modification is required for the axle to clear the engine perch on the subframe.\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eAxles\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e02M\/02Q Compatible Axles (not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAlthough our mounts are OEM position, custom axles are required to accommodate the transmission. The 02M\/02Q is larger and uses larger inner CV's compared to the factory 02J Transmission in the MK3. Any axles on the market intended for an 02M\/02Q in a MK3 or Corrado VR6 application will work with our mount positioning.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\u003c\/ul\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eRadiators\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCompatible with North American and European Rad supports and radiators.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eFans\u003c\/h4\u003e\n\u003cp data-mce-fragment=\"1\"\u003eA factory fan set up will work, however if space or engine cooling is a concern, a slim fan set up with Spal fans is recommended. Check out our Engine Cooling dropdown under Swap Parts.\u003c\/p\u003e","brand":"Fabless Manufacturing","offers":[{"title":"2.8L 12v VR6 \/ 02M - MK4 6-Speed Manual","offer_id":32690380243041,"sku":"29-3235","price":1040.0,"currency_code":"USD","in_stock":true},{"title":"2.8L 12v VR6 \/ 02M+ - MK5\/6\/7 6-Speed Manual","offer_id":39893082931297,"sku":"29-3739","price":1040.0,"currency_code":"USD","in_stock":true},{"title":"2.8L 24v 3.2L \u0026 3.6L \/ 02M - MK4 6-Speed Manual","offer_id":32690380275809,"sku":"29-3236","price":1075.0,"currency_code":"USD","in_stock":true},{"title":"2.8L 24v 3.2L \u0026 3.6L \/ 02M+ - MK5\/6\/7 6-Speed Manual","offer_id":39893082964065,"sku":"29-3754","price":1075.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0074\/0727\/2005\/products\/VR6_02M.jpg?v=1648046976"},{"product_id":"vr6-complete-mount-kit-oem-position-vw-mk2-corrado","title":"VR6\/02J Complete Mount Kit - VW MK2","description":"\u003cp data-mce-fragment=\"1\"\u003eThe Fabless VR6 Complete Mount Kit is a full mount solution, providing an upgraded front cross member and all the mounts needed for a completely bolt in swap. Made from mild steel, beautifully TIG Welded and coated with black powder coat for durability.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis kit will keep the 02A\/02J transmission in OEM position to maintain stock axle fitment. These mounts are perfect for any VR6 swap (12v, 24v, 3.2L and 3.6L), or as a factory replacement\/upgrade to MK3 VR6 or Corrado VR6 engine mounts.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur mounts are stronger and stiffer than the factory mounts while also providing some adjustability on the Block Mount. The block mount has two positions; factory height \u0026amp; up to a 16mm drop (16mm lower setting with MK3\/Corrado VR6 Subframe, 8mm drop with MK2\/Corrado G60 subframe selection). The lower setting on the mount is useful for additional hood clearance but it also helps to level out the engine appearance.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThese mounts will have the typical VR lean on the top block mount setting and less lean on the lower setting.\u003c\/p\u003e\n\u003cdiv class=\"youtube-container no-container\" data-mce-fragment=\"1\"\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/5QOTuA_q6A4\" class=\"no-container\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.youtube.com\/embed\/5QOTuA_q6A4\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\n\u003cdiv class=\"fancybox-loading\" data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eVR6 Block Mount with polyurethane bushing\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e02A\/02J Transmission Mount with polyurethane bushing\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMK2 Tubular Front Cross Bar with VR6 Front Engine Mount\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eZinc plated mounting hardware\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBlack powder coat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eAdd-Ons\/Compatible Products\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAdjustable Upper Rad Mounts (VR6 Radiator)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePolyurethane Jack Pad\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eCompatibility\u003c\/h3\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eVehicles\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eVW MK2 Golf\/Jetta\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePassat*\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003e*For Passat please contact for fitment.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eEngines\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2.8L 12v VR6\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2.8L 24v VR6\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e3.2L VR6\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e3.6L VR6\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\u003c\/ul\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eTransmissions\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e02A 5-Speed\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e02J 5-Speed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eAxles\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli\u003eFactory 100mm Axles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eRadiators\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e8v\/16v Radiator\u003c\/li\u003e\n\u003cli\u003eMK3 VR6 Radiator (North American)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eRemovable lower rad pins are provided for fitment of both rad types listed. For the MK2 rad support, we offer bolt in upper radiator mounts for both options also. \u003c\/em\u003e\u003c\/p\u003e\n\u003ch4\u003eFans\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSlim fans are recommended with the VR6 engine to ensure fitment. Check out our slim fan solution in our Engine Cooling dropdown under Swap Parts.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fabless Manufacturing","offers":[{"title":"VW MK2\/Corrado G60 Subframe \/ 2.8L 12v VR6 - Trans 02A 02J","offer_id":32733953392737,"sku":"29-3206","price":935.0,"currency_code":"USD","in_stock":true},{"title":"VW MK2\/Corrado G60 Subframe \/ 2.8L 24v 3.2L \u0026 3.6L VR6 - Trans 02A 02J","offer_id":32733953425505,"sku":"29-3208","price":950.0,"currency_code":"USD","in_stock":true},{"title":"VW MK3\/Corrado VR6 Subframe \/ 2.8L 12v VR6 - Trans 02A 02J","offer_id":32733953458273,"sku":"29-3207","price":935.0,"currency_code":"USD","in_stock":true},{"title":"VW MK3\/Corrado VR6 Subframe \/ 2.8L 24v 3.2L \u0026 3.6L VR6 - Trans 02A 02J","offer_id":32733953491041,"sku":"29-3209","price":950.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0074\/0727\/2005\/products\/02_1119f993-f6c1-45db-8ad5-00b88de1773d.jpg?v=1647892982"},{"product_id":"vr6-complete-mount-kit-oem-position-vw-mk3","title":"VR6\/02J Complete Mount Kit - VW MK3","description":"\u003cp data-mce-fragment=\"1\"\u003eThe Fabless VR6\/02J Complete Mount Kit is a full mount solution, providing an upgraded front cross member and all the mounts needed for a completely bolt in swap. Made from mild steel, beautifully TIG Welded and coated with black powder coat for durability.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis kit will keep the 02A\/02J transmission in OEM position to maintain stock axle fitment. These mounts are perfect for any VR6 swap (12v, 24v, 3.2L and 3.6L), or as a factory replacement\/upgrade to MK3 VR6 or Corrado VR6 engine mounts.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eOur mounts are stronger and stiffer than the factory mounts while also providing some adjustability on the Block Mount. The block mount has two positions; factory height (top position) \u0026amp; a 16mm drop with MK3\/Corrado VR6 Subframe (lower setting). \u003c\/span\u003e The lower setting on the mount is useful for additional hood clearance but it also helps to level out the engine appearance.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThese mounts will have the typical VR lean on the top block mount setting and less lean on the lower setting.\u003c\/p\u003e\n\u003cdiv class=\"youtube-container no-container\" data-mce-fragment=\"1\"\u003e\n\u003ciframe class=\"no-container\" src=\"https:\/\/www.youtube.com\/embed\/5QOTuA_q6A4\" height=\"315\" width=\"560\" data-mce-fragment=\"1\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\" data-mce-src=\"https:\/\/www.youtube.com\/embed\/5QOTuA_q6A4\"\u003e\u003c\/iframe\u003e\n\u003cdiv class=\"fancybox-loading\" data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eVR6 Block Mount with polyurethane bushing\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e02A\/02J Transmission Mount with polyurethane bushing\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMK3 Tubular Front Cross Bar with VR6 Front Engine Mount\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eZinc plated mounting hardware\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBlack powder coat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eAdd-Ons\/Compatible Products\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePolyurethane Jack Pad\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan\u003eRadiator Mount Kit - VW MK3 (radiator bushings)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eCompatibility\u003c\/h3\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eVehicles\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eVW MK3 Golf\/Jetta\/Cabriolet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eEngines\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2.8L 12v VR6\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2.8L 24v VR6\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e3.2L VR6\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e3.6L VR6\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eFront Cross Members\u003c\/h4\u003e\n\u003cp data-mce-fragment=\"1\"\u003eMK3 Golf\/Jetta\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFabless Tubular Front Cross Bar - VW MK3\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFactory Front Cross Member for 12v applications\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eTransmissions\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e02A 5-Speed\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e02J 5-Speed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eAxles\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli\u003eFactory 100mm Axles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eRadiators\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCompatible with North American and European Rad supports and radiators.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eFans\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan\u003eA factory fan set up will work, however if space or engine cooling is a concern, a slim fan set up with Spal fans is recommended. Check out our Engine Cooling dropdown under Swap Parts.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fabless Manufacturing","offers":[{"title":"2.8L 12v VR6 - Trans 02A 02J","offer_id":32734053138529,"sku":"29-3237","price":940.0,"currency_code":"USD","in_stock":true},{"title":"2.8L 24v 3.2L \u0026 3.6L VR6 - Trans 02A 02J","offer_id":32734053171297,"sku":"29-3238","price":955.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0074\/0727\/2005\/products\/VR6.jpg?v=1648067588"},{"product_id":"vr6-complete-mount-kit-oem-position-vw-corrado","title":"VR6\/02J Complete Mount Kit - VW Corrado","description":"\u003cp data-mce-fragment=\"1\"\u003eThe Fabless VR6\/02J Complete Mount Kit is a full mount solution, providing an upgraded front cross member and all the mounts needed for a completely bolt in swap.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis kit will keep the 02A\/02J transmission in OEM position to maintain stock axle fitment. These mounts are perfect for any VR6 swap (12v, 24v, 3.2L and 3.6L), or as a factory replacement\/upgrade to Corrado VR6 engine mounts.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur mounts are stronger and stiffer than the factory mounts while also providing some adjustability on the Block Mount. The block mount has two positions; factory height \u0026amp; up to a 16mm drop (16mm lower setting with Corrado\/MK3 VR6 Subframe, 8mm drop with Corrado\/MK2 G60 subframe selection). The lower setting on the mount is useful for additional hood clearance but it also helps to level out the engine appearance.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThese mounts will have the typical VR lean on the top block mount setting and less lean on the lower setting.\u003c\/p\u003e\n\u003cdiv class=\"youtube-container no-container\" data-mce-fragment=\"1\"\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/5QOTuA_q6A4\" class=\"no-container\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.youtube.com\/embed\/5QOTuA_q6A4\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\n\u003cdiv class=\"fancybox-loading\" data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eVR6 Block Mount with polyurethane bushing\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e02A\/02J Transmission Mount with polyurethane bushing\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCorrado Tubular Front Cross Bar with VR6 Front Engine Mount\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eZinc plated mounting hardware\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBlack powder coat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eAdd-Ons\/Compatible Products\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePolyurethane Jack Pad\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eCompatibility\u003c\/h3\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eVehicles\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCorrado VR6\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCorrado G60\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\n\u003cem data-mce-fragment=\"1\"\u003e\u003c\/em\u003eEngines\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2.8L 12v VR6\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2.8L 24v VR6\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e3.2L VR6\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e3.6L VR6\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eFront Cross Members\u003c\/h4\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCorrado G60\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFabless Tubular Front Cross Bar - VW Corrado\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eModified factory front cross member\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCorrado VR6\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFabless Tubular Front Cross Bar - VW Corrado\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFactory cross member for 12v applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eTransmissions\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e02A 5-Speed\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e02J 5-Speed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eAxles\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli\u003eFactory 100mm Axles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eRadiators\u003c\/h4\u003e\n\u003cp\u003eThe MK3 VR6 Radiator is recommended in this application for additional cooling. The placement of the Tubular Front Cross Bar allows fitment for this larger radiator in the Corrado. However, \u003cspan data-mce-fragment=\"1\"\u003eUpper radiator tabs will need to be fabricated to secure the top of the radiator to the Corrado G60 or VR6 Upper Radiator Support.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e8v\/16v Radiator\u003c\/li\u003e\n\u003cli\u003eMK3 VR6 Radiator (North American)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eRemovable lower rad pins are provided for fitment of both rad types listed.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch4\u003eFans\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSlim fans are recommended with the VR6 engine to ensure fitment. Check out our slim fan solution in our Engine Cooling dropdown under Swap Parts.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fabless Manufacturing","offers":[{"title":"VW Corrado G60\/MK2 Subframe \/ 2.8L 12v VR6 - Trans 02A 02J","offer_id":39883468341345,"sku":"29-3211","price":935.0,"currency_code":"USD","in_stock":true},{"title":"VW Corrado G60\/MK2 Subframe \/ 2.8L 24v 3.2L \u0026 3.6L VR6 - Trans 02A 02J","offer_id":39883468374113,"sku":"29-3215","price":950.0,"currency_code":"USD","in_stock":true},{"title":"VW Corrado VR6\/MK3 Subframe \/ 2.8L 12v VR6 - Trans 02A 02J","offer_id":39883468406881,"sku":"29-3214","price":935.0,"currency_code":"USD","in_stock":true},{"title":"VW Corrado VR6\/MK3 Subframe \/ 2.8L 24v 3.2L \u0026 3.6L VR6 - Trans 02A 02J","offer_id":39883468439649,"sku":"29-3218","price":950.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0074\/0727\/2005\/products\/02.jpg?v=1647278050"},{"product_id":"vr6-02m-complete-mount-kit-vw-corrado","title":"VR6\/02M Complete Mount Kit - VW Corrado","description":"\u003cp data-mce-fragment=\"1\"\u003eThe Fabless VR6\/02M Complete Mount Kit provides a solution to install any VR6 Engine with an 02M Transmissions in a Corrado VR6 or G60. This kit\u003cspan data-mce-fragment=\"1\"\u003e is a full mount solution, providing an upgraded front cross member and all the mounts needed for the swap.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAvailable in both subframe mounting options; Corrado G60\/MK2 subframe or Corrado VR6\/MK3 subframe.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur mounts are stronger and stiffer than the factory mounts while also providing some adjustability on the Block Mount. The block mount has two positions; factory height \u0026amp; up to a 16mm drop (16mm lower setting with Corrado VR6\/MK3 Subframe, 8mm drop with Corrado G60\/MK2 subframe selection). The lower setting on the mount is useful for additional hood clearance but it also helps to level out the engine appearance without impacting the axle fitment. \u003cspan data-mce-fragment=\"1\"\u003eThese mounts will have the typical factory VR6 lean on the top block mount setting and less lean on the lower setting. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThese mounts keep the engine in OEM position, which means 02M axles on the market are compatible. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eNOTE: The subframe cup has to be moved back to clear the inner CV on the 02M transmission.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eVR6 Block Mount with subframe Perch\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e02M Transmission Mount with subframe Perch\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCorrado Tubular Front Cross Bar with Front Engine Mount\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eZinc plated mounting hardware\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePolyurethane bushings\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBlack powder coat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eAdd-Ons\/Compatible Products\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePolyurethane Jack Pad\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eCompatibility\u003c\/h3\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eVehicles\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCorrado VR6\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCorrado G60\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eEngines\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2.8L 12v VR6\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2.8L 24v VR6\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e3.2L VR6\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e3.6L VR6\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eTransmissions\u003c\/h4\u003e\n\u003cp\u003e02M\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e02M 6-Speed Manual FWD\/AWD - VW MK4\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e02M 6-Speed Manual FWD\/AWD - Audi MK1 TT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e02M+\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e02Q\u003cspan\u003e \u003c\/span\u003e6-Speed Manual FWD\/AWD - VW MK5\/MK6\/MK7\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn AWD\/quattro applications a Corrado G60\/MK2 Subframe is needed for clearance. Otherwise modification is required for the axle to clear the engine perch on the subframe.\u003c\/p\u003e\n\u003ch5\u003e\u003c\/h5\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eAxles\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e02M\/02Q Compatible Axles (not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAlthough our mounts are OEM position, custom axles are required to accommodate the transmission. The 02M\/02Q is larger and uses larger inner CV's compared to the factory 02A Transmission in the Corrado. Any axles on the market intended for an 02M\/02Q in a MK2, MK3 or Corrado application will work with our mount positioning.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\u003c\/ul\u003e\n\u003ch4\u003eRadiators\u003c\/h4\u003e\n\u003cp\u003e\u003cspan\u003eUpper radiator tabs will need to be fabricated to secure the top of the radiator to the Corrado G60 or VR6 Upper Radiator Support.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e8v\/16v Radiator\u003c\/li\u003e\n\u003cli\u003eMK3 VR6 Radiator (North American)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eRemovable lower rad pins are provided for fitment of both rad types listed. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003c\/em\u003eFans\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eA factory MK3 VR6 fan set up will work, however if space or engine cooling is a concern, a slim fan set up with Spal fans is recommended. Check out our Engine Cooling Collection under the Swap Parts Menu at the top of the page.\u003c\/span\u003e\u003c\/p\u003e","brand":"Fabless Manufacturing","offers":[{"title":"VW Corrado G60\/MK2 Subframe \/ 2.8L 12v VR6 \/ Trans 02M - MK4 6-Speed Manual","offer_id":39886318731361,"sku":"29-3224","price":1035.0,"currency_code":"USD","in_stock":true},{"title":"VW Corrado G60\/MK2 Subframe \/ 2.8L 12v VR6 \/ Trans 02M+ - MK5\/6\/7 6-Speed Manual","offer_id":39886530478177,"sku":"29-3249","price":1035.0,"currency_code":"USD","in_stock":true},{"title":"VW Corrado VR6\/MK3 Subframe \/ 2.8L 12v VR6 \/ Trans 02M - MK4 6-Speed Manual","offer_id":39886318796897,"sku":"29-3223","price":1035.0,"currency_code":"USD","in_stock":true},{"title":"VW Corrado VR6\/MK3 Subframe \/ 2.8L 12v VR6 \/ Trans 02M+ - MK5\/6\/7 6-Speed Manual","offer_id":39886530543713,"sku":"29-3251","price":1035.0,"currency_code":"USD","in_stock":true},{"title":"VW Corrado VR6\/MK3 Subframe \/ 2.8L 24v 3.2L \u0026 3.6L \/ Trans 02M - MK4 6-Speed Manual","offer_id":39886318829665,"sku":"29-3227","price":1070.0,"currency_code":"USD","in_stock":true},{"title":"VW Corrado VR6\/MK3 Subframe \/ 2.8L 24v 3.2L \u0026 3.6L \/ Trans 02M+ - MK5\/6\/7 6-Speed Manual","offer_id":39886530576481,"sku":"29-3253","price":1070.0,"currency_code":"USD","in_stock":true},{"title":"VW Corrado G60\/MK2 Subframe \/ 2.8L 24v 3.2L \u0026 3.6L \/ Trans 02M - MK4 6-Speed Manual","offer_id":39888446980193,"sku":"29-3226","price":1070.0,"currency_code":"USD","in_stock":true},{"title":"VW Corrado G60\/MK2 Subframe \/ 2.8L 24v 3.2L \u0026 3.6L \/ Trans 02M+ - MK5\/6\/7 6-Speed Manual","offer_id":39888447373409,"sku":"29-3252","price":1070.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0074\/0727\/2005\/products\/02m_v.jpg?v=1647375196"},{"product_id":"vr6-02m-hidden-mount-kit-weld-in-vw-mk4","title":"VR6\/02M Hidden Mount Kit (Weld In) - VW MK4","description":"\u003cp\u003eThe Fabless VR6\/02M Weld-In Hidden Mount Kit for the VW MK4 hides the mounts behind the engine and allows you to remove your factory mounts, including the dog bone mount, for a cleaner look. \u003cspan\u003ePerfect for a shaved engine bay set up.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe Tubular Front Cross Bar MAX for the MK4 is required to complete the hidden mount set up, as it provides the support to the front of the engine that is needed when the other two engine supports are moved to the back. \u003cspan\u003eThe Tubular Front Cross Bar MAX has curved uprights for intercooler piping clearance and adds a front jack point!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eOur mounts are stronger and stiffer than the factory mounts and use polyurethane bushings for more durability.\u003c\/p\u003e\n\u003cp\u003eDoes your engine need a 1\" lift? Our kit comes with an option to raise the motor by 1\". Be sure to select the 1\" Lift option in the dropdown menu.\u003c\/p\u003e\n\u003cp\u003eMade from HRPO steel, beautifully TIG Welded and coated with black powder coat for durability.\u003cbr\u003e\u003cbr\u003eThese mounts are OEM position, which means they don't alter the engine position.\u003c\/p\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVR6 Block Mount with polyurethane bushing\u003c\/li\u003e\n\u003cli\u003eWeld-in perch mounts\u003c\/li\u003e\n\u003cli\u003e02M Transmission Mount with polyurethane bushing\u003c\/li\u003e\n\u003cli\u003eTubular Front Cross Bar MAX with Front Engine Mount\u003c\/li\u003e\n\u003cli\u003eZinc plated mounting hardware\u003c\/li\u003e\n\u003cli\u003eBlack powder coat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eRequired Add-Ons\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eTubular Front Cross Bar Max- VW MK4\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOptional Add-Ons\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePolyurethane Jack Pad\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003ch4\u003eVehicles\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eVW MK4 Golf\/R32\/Jetta\/Bora\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eEngines\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2.8L 12v VR6\u003c\/li\u003e\n\u003cli\u003e2.8L 24v VR6\u003c\/li\u003e\n\u003cli\u003e3.2L VR6\u003c\/li\u003e\n\u003cli\u003e3.6L VR6\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTubular Front Cross Bar *Required\u003c\/h4\u003e\n\u003cp\u003eMK4\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFabless Tubular Front Cross Bar MAX - VW MK4\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTransmission\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e02M 6-Speed\u003c\/li\u003e\n\u003cli\u003e02Q \u0026amp; DQ250 gearbox option available please contact  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe Weld-In perch perch mounts come in a gray weldable primer and they unbolt from the upper perch mount. \u003c\/p\u003e\n\u003cp\u003eTo install the mounts, keep your factory MK4 mounts in place, and bolt the fully assembled Fabless block mount and transmission mount on. Where the weld-in perch mounts fall on the subframe, is where they need to be welded in place. Once the perch mounts are welded, that section of the mount can be unbolted so the rest of the mount can be removed.\u003c\/p\u003e\n\u003cp\u003eFrom here you can paint the subframe and weld-in perch mount, install the rest of the Hidden Mount Kit and remove your factory mounts.\u003c\/p\u003e","brand":"Fabless Manufacturing","offers":[{"title":"Factory Engine Height \/ 2.8L 12v VR6 02M - Tubular Front Cross Bar MAX","offer_id":52653139493140,"sku":"29-4121","price":1485.0,"currency_code":"USD","in_stock":true},{"title":"Factory Engine Height \/ 2.8L 24v 3.2L \u0026 3.6L VR6 02M - Tubular Front Cross Bar MAX","offer_id":52653139525908,"sku":"29-4122","price":1520.0,"currency_code":"USD","in_stock":true},{"title":"Factory Engine Height \/ I already have the Tubular Front Cross Bar MAX - MK4","offer_id":52653139558676,"sku":"29-4123","price":770.0,"currency_code":"USD","in_stock":true},{"title":"1\" Engine Lift* \/ 2.8L 12v VR6 02M - Tubular Front Cross Bar MAX","offer_id":52653139591444,"sku":"29-4124","price":1535.0,"currency_code":"USD","in_stock":true},{"title":"1\" Engine Lift* \/ 2.8L 24v 3.2L \u0026 3.6L VR6 02M - Tubular Front Cross Bar MAX","offer_id":52653139624212,"sku":"29-4125","price":1570.0,"currency_code":"USD","in_stock":true},{"title":"1\" Engine Lift* \/ I already have the Tubular Front Cross Bar MAX - MK4","offer_id":52653139656980,"sku":"29-4126","price":820.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0074\/0727\/2005\/files\/PHOTOS_COMING_SOON__81326.1781030842.1280.1280.png?v=1781200122"},{"product_id":"vr6-02j-hidden-mount-kit-weld-in-vw-mk4","title":"VR6\/02J Hidden Mount Kit (Weld In) - VW MK4","description":"\u003cp\u003eThe Fabless VR6\/02J Weld-In Hidden Mount Kit for the VW MK4 hides the mounts behind the engine and allows you to remove your factory mounts, including the dog bone mount, for a cleaner look.\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003ePerfect for a shaved engine bay set up.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe Tubular Front Cross Bar MAX for the MK4 is required to complete the hidden mount set up, as it provides the support to the front of the engine that is needed when the other two engine supports are moved to the back.\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eThe Tubular Front Cross Bar MAX has curved uprights for intercooler piping clearance and adds a front jack point!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eOur mounts are stronger and stiffer than the factory mounts and use polyurethane bushings for more durability.\u003c\/p\u003e\n\u003cp\u003eDoes your engine need a 1\" lift? Our kit comes with an option to raise the motor by 1\". Be sure to select the 1\" Lift option in the dropdown menu.\u003c\/p\u003e\n\u003cp\u003eMade from HRPO steel, beautifully TIG Welded and coated with black powder coat for durability.\u003cbr\u003e\u003cbr\u003eThese mounts are OEM position, which means they don't alter the engine position.\u003c\/p\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVR6 Block Mount with polyurethane bushing\u003c\/li\u003e\n\u003cli\u003eWeld-in perch mounts\u003c\/li\u003e\n\u003cli\u003e02J Transmission Mount with polyurethane bushing\u003c\/li\u003e\n\u003cli\u003eTubular Front Cross Bar MAX with Front Engine Mount\u003c\/li\u003e\n\u003cli\u003eZinc plated mounting hardware\u003c\/li\u003e\n\u003cli\u003eBlack powder coat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eRequired Add-Ons\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eTubular Front Cross Bar Max- VW MK4\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOptional Add-Ons\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePolyurethane Jack Pad\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003ch4\u003eVehicles\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eVW MK4 Golf\/R32\/Jetta\/Bora\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eEngines\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2.8L 12v VR6\u003c\/li\u003e\n\u003cli\u003e2.8L 24v VR6\u003c\/li\u003e\n\u003cli\u003e3.2L VR6\u003c\/li\u003e\n\u003cli\u003e3.6L VR6\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTubular Front Cross Bar *Required\u003c\/h4\u003e\n\u003cp\u003eMK4\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFabless Tubular Front Cross Bar MAX - VW MK4\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTransmission\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e02J 5-Speed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe Weld-In perch perch mounts come in a gray weldable primer and they unbolt from the upper perch mount. \u003c\/p\u003e\n\u003cp\u003eTo install the mounts, keep your factory MK4 mounts in place, and bolt the fully assembled Fabless block mount and transmission mount on. Where the weld-in perch mounts fall on the subframe, is where they need to be welded in place. Once the perch mounts are welded, that section of the mount can be unbolted so the rest of the mount can be removed.\u003c\/p\u003e\n\u003cp\u003eFrom here you can paint the subframe and weld-in perch mount, install the rest of the Hidden Mount Kit and remove your factory mounts.\u003c\/p\u003e","brand":"Fabless Manufacturing","offers":[{"title":"Factory Height \/ 2.8L 12v VR6 02J - Tubular Front Cross Bar MAX","offer_id":52771410837780,"sku":"29-4112","price":1214.0,"currency_code":"USD","in_stock":true},{"title":"Factory Height \/ 2.8L 24v 3.2L \u0026 3.6L VR6 02J - Tubular Front Cross Bar MAX","offer_id":52771410870548,"sku":"29-4113","price":1229.0,"currency_code":"USD","in_stock":true},{"title":"Factory Height \/ I already have the Tubular Front Cross Bar MAX - MK4","offer_id":52771410903316,"sku":"29-4111","price":549.0,"currency_code":"USD","in_stock":true},{"title":"1\" Engine Lift* \/ 2.8L 12v VR6 02J - Tubular Front Cross Bar MAX","offer_id":52771410936084,"sku":"29-4114","price":1264.0,"currency_code":"USD","in_stock":true},{"title":"1\" Engine Lift* \/ 2.8L 24v 3.2L \u0026 3.6L VR6 02J - Tubular Front Cross Bar MAX","offer_id":52771410968852,"sku":"29-4115","price":1279.0,"currency_code":"USD","in_stock":true},{"title":"1\" Engine Lift* \/ I already have the Tubular Front Cross Bar MAX - MK4","offer_id":52771411001620,"sku":"29-4116","price":599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0074\/0727\/2005\/files\/IMG_5750-Edit.jpg?v=1783555860"}],"url":"https:\/\/www.fablessmanufacturing.com\/collections\/vr6-2-8l-3-2l-3-6l.oembed","provider":"Fabless Manufacturing","version":"1.0","type":"link"}